Little Giant 1/2 HP 63 gph Thermoplastic Statuary Pump
This wet-rotor pump, often referred to as a magnetic-drive pump by other manufacturers, utilizes an epoxy- encapsulated motor and plastic housing. A permanent magnet is attached to the impeller. The magnet acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor, thus the term wet-rotor. It is seal-less and oil-less. This pump works well in water garden, statuary and some industrial applications. Therefore, the pump does not produce as much pressure and will not pump water as high as its epoxy-encapsulated, direct-drive counterpart.

• UPC: 010121195509
• Manufacturer Part No: 519550

• Brand Name: Little Giant
• Housing Material: Thermoplastic
• Product Type: Statuary Pump
• Horsepower: 1/2 hp
• Amperage: 0.1 amps
• Battery Backup: No
• Float Switch: No
• Head Pressure: 1 ft.
• Corrosion Resistant: Yes
• Cord Length: 6 ft.
• Voltage: 115 volt
• Maximum Discharge Flow: 63 gph
• Hardware Included: No
• Adjustable Speed: No
• Pump Switch Type: Switchless
• UL Listed: Yes
• Packaging Type: Boxed
• SSPMA Certified: No
• Outlet Connection: 3/8 in.
• Submersible: Yes
• CSA Listed: Yes
• Self Priming: Yes
• With Tank: No
• Maximum Pumping Height: 2-7/64 ft.
• Depth: 2.7
• Width: 1.9
• Power Source: Battery, AC
• Maximum Feet of Head: 12.2
• Maximum Temperature: 120
• Minimum Temperature: 35
• Height: 2.6
• Discharge Pipe Size: 3/8 inch
• Inlet Diameter: 3/4 in.
• Run Dry Capable: No
• Self Priming: Self-Priming
• Volts: 115 volt
• Depth: 2.60 inch
• Height: 2.70 inch
• Width: 1.90 inch
• Maximum Feet of Head: 2.1 feet
• On/Off Operations: Manual
• Maximum Feet of Head: 2.1 feet ft.
• Height: 2.70 inch in.
• Depth: 2.60 inch in.
• Width: 1.90 inch in.
• Horsepower: 1/2 HP
• Volts: 115 V